Language:English
 

Products

Message

If you have any comments or suggestions, please leave us a message!

Singapore: +65 6484 3357
USA:1-408-913-1300
            1-508-934-7480

cust-service@akribis-sys.com

Feedback>>

Your Present Location:Home >> Products >> Linear Motor Stages >> WGL
Products
  • Name: WGL
  • Explain: Wide Guide Linear Motor Stage
  • WGL Series (wide guide linear motor stage) driven by Akribis’ ironless linear motor system, provides high precision and high reliability stages. Using terse design, though, WGL Series provides great corrosion resistant.

 

Design Feature

 

A. Direct-drive ironless linear motor positioning system

B. Precise motion and homing

C. Terse design

D. Width linear guide

WGL Series (wide guide linear motor stage) driven by Akribis’ ironless linear motor system, provides high precision and high reliability stages. Using terse design, though, WGL Series provides great corrosion resistant.

 

Direct-drive ironless linear motor positioning system

WGL Series are directly driven by Akribis’ ironless linear motor. It provides smoothly motion at low speed condition, quick response and short settling time.

 

Precise motion and homing

WGL Series integrate high level precision optical encoder system, which contributes a precise positioning motion for customers.

 

Terse design

WGL Series using coverless design, fewer parts, but it provides great corrosion resistant.

 

Width linear guide

To balance light moving mass and toque resistant, WGL Series use single wide linear guide design.

 

MODEL WGL138
MOTOR AUM3 AUM4
S2 S3 S4 S2 S3 S4

Size

(mm)

Carrige Length (A) 160 220 280 160 220 280
Module Height 65.8
Module Width 182
Limit Position (Y) 88 118 148 88 118 148
Carriage Mounting Hole (B) 37.25 67.25 97.25 37.25 67.25 97.25
Moving Mass (Kg) 1.3 1.7 2.1 1.4 1.9 2.5

Strock

(mm)

200

Module Mass

(Kg)

9.2 11.4 12.6 11.8 14.0 15.7
300 10.9 12.5 14.2 13.9 16.1 17.8
400 13.2 14.9 16.7 17.0 19.2 20.9
500 15.6 17.3 19.0 20.1 22.3 24.0
600 17.4 19.1 20.8 22.4 24.6 26.2
1100 26.1 27.8 29.5 33.9 34.1 37.7
1200 30.2 31.8 33.6 39.1 41.4 43.0

Stroke

(mm)

200

Module Mass

(mm)

386 446 506 386 446 506
300 486 546 606 486 546 606
400 586 646 706 586 646 706
500 686 746 806 686 746 806
600 786 846 906 786 846 906
1000 1186 1246 1306 1186 1246 1306
1200 1386 1446 1506 1386 1446 1506

Bearing Parameters

Maximum Bearing Load (N) 1824
Recommended Roll Moment (Nm) 17.6
Recommended Pitch Moment (Nm) 135.9 245.3 354.8 135.9 245.3 354.8
Recommended Yaw Moment (Nm)

 

Performance Parameter Unit Value
Acceleration G 10
Velocity (1μm resolution) m/s 5 (40μm scale pitch and 20MHz counter frequency)
Velocity (0.5μm resolution) 2.5 (20μm scale pitch and 20MHz counter frequency)
Velocity (0.1μm resolution) 1.3 (20μm scale pitch and 20MHz counter frequency)
Velocity(Analogue) 8 (40μm scale pitch and 200KHz input frequency)
4 (20μm scale pitch and 200KHz input frequency)
*Straightness μm ±3μm/25mm,NTE±10μm/300mm
*Flatness ±3μm/25mm,NTE±10μm/300mm
Repeatability (1μm resolution) ±3μm (40μm scale pitch)
Repeatability (0.5μm resolution) ±1.5μm (20μm scale pitch)
Repeatability (0.1μm resolution) ±1μm (20μm scale pitch)
Repeatability (Analogue) ±5counts

* All measurement taken when module is mounted on a 5micron flat granite table.